Cyclades AlterPath BladeManager Manuel d'instructions télécharger pdf (Page 102)

88 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide

2. Select Radius from the Authentication Type pull-down menu.

3. Enter the IP address of the first or only authentication server in the First Authentication

Server field.

4. Enter the IP address of a second authentication server (if available) in the Second

Authentication Server field.

5. Enter the secret in the Secret field.

6. Enter one or more time

-out values in the Timeout field.

7. Enter a number of retries in the Retries field.

8. Click Save and apply changes.

Configuring an SMB authentication server

By selecting the Config - Authentication menu option and selecting SMB from the Authentication

Type pull

-down menu, the administrative user can configure an SMB authentication server.

Configure an SMB authentication server when the SP manager or any of the target devices is to use

the SMB authentication method or any of its variations (Local/SMB, SMB/Local or SMB

Down/Local).

The administrative user must obtain from the server’s administrator the needed Domain, Primary

Domain Controller and Secondary Domain Controller information.

Work with the SMB server’s administrator to ensure that the following types of accounts are set up

on the SMB server and that the administrators of the SP manager and target devices know the

passwords assigned to the accounts:

• An account for admin or other administrative user

• If SMB authentication is specified for the SP manager, accounts for all users who need to log

into the SP manager

• If SMB authentication is specified for devices, accounts for users who need access to the

target devices

To configure an SMB authentication server:

1. Select the Config

- Authentication menu option.

2. Select SMB from the Authentication Type pull

-down menu.

3. Enter the SMB domain name in the Domain field.

4. Enter the IP address of the primary domain controller in the Primary Domain Controller field.

5. Enter the IP address of the secondary domain controller in the Secondary Domain

Controller field.

6. Click Save and apply changes.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 239 240

Pas de commentaire

Cyclades AlterPath BladeManager Manuel d'instructions Page 102