Cyclades AlterPath OnBoard Informations techniques télécharger pdf (Page 426)

100

101

Address Configuration for Connected Devices

386 AlterPath OnBoard Administrator’s Guide

• When configuring “connSub1” for access to sub1: Left subnet:

192.168.1.0/24

• When configuring “connSub2” for access to sub2: Left subnet:

192.168.4.0/22

• Right ID: @workstation

• Right IP address: the IP address of the user’s workstation: 12.34.56.78

• Right nexthop: leave blank if the user’s workstation and the OnBoard

are able to exchange packets.

• Right subnet: leave blank

The other IPSec configuration parameters (such as Authentication protocol

and Boot action) would be determined by the site’s policy, equipment

compatibility, and site routing requirements.

Note: In some circumstances (for example, if packets are being blocked by a

firewall on the client’s default gateway), the user’s workstation and the

OnBoard are not going to be able to exchange packets. Setting one or both of

the Right and Left nexthop parameters to the IP address of a host route and

selecting “Add and route” as the boot action may be needed to create a route

that allows the two endpoints to communicate.

The following screen example shows the configuration on the Web Manager

Network → VPN connections: IPSec Add new connection dialog for a

connection named “connSub1,” with the values specified from the above list.

Configuration of “connSub2” would be similar, with a different “Connection

name” and “Left subnet values.”

1 2 ... 421 422 423 424 425 426 427 428 429 430 431 ... 501 502

Commentaires sur ces manuels

Pas de commentaire

Cyclades AlterPath OnBoard Informations techniques Page 426

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cyclades AlterPath OnBoard