Cyclades AlterPath OnBoard Informations techniques télécharger pdf (Page 287)

100

101

Web Manager "Config" Menu Options 247

Configuring SNMP

The “Device devicename SNMP settings” dialog appears.

3. Enter the identifier for the object to be managed in the OID field.

4. Select a version from the SNMP version pull-down menu.

5. If either the v1 or v2c version is selected in Step 4, enter a community

name in the “Community field.

6. If the v3 version is selected in Step 4, do the following steps.

a. Enter the user name required for authentication in the “User name”

field.

b. Select an authentication method from the “Auth method” pull-down

menu.

c. Enter an optional authentication password in the “Auth pass” field.

d. Select an encyrption method from the “Encryption” pull-down menu.

e. Enter an optional encryption password in the “Crypt pass” field.

f. Click OK.

T To Configure a Device’s SNMP Access

Settings

Do this procedure to configure how users on the public side authenticate

themselves to the OnBoard, whether they are using SNMP functionality on

the OnBoard itself or SNMP functionality proxied from the device.

1. Select a device to configure on the Config → SNMP page, as described

under“To Begin Configuring SNMP for a Device” on page 246.

2. Click the “Add access” button under the “SNMP access settings” heading.

The “Device -devicename- SNMP access configuration” screen appears.

3. Select a version from the “SNMP version” pull-down menu.

4. If either the v1 or v2c version is selected in Step 3, do the following steps.

a. Enter a community name in the “Community” field.

b. Select a “Source” radio button, either “Default” or “Use IP.”

c. If “Use IP” is selected, enter a source IP address.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 501 502

Commentaires sur ces manuels

Pas de commentaire

Cyclades AlterPath OnBoard Informations techniques Page 287

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cyclades AlterPath OnBoard